Installing RetainPro

Use this procedure to install RetainPro on any computer that you may wish to use it on.

Note! RetainPro MAY NOT be installed on a central computer and launched using a shortcut on another computer. This was the typical way of installing on older versions of RetainPro, but this method is NO LONGER VALID.

Summary:

Download the software from http://www.retainpro.com/RP10_SETUP.html.

Run the installer package.

Follow the on-screen instructions for installation.

Launch the program and follow the on-screen instructions for Internet Activation using the most recent Product Control Code.

Details:

For detailed installation and activation instructions, please refer to the following installation and activation document: http://www.retainpro.com/pdf/rp10_install.pdf